batgrbproduct Analysis for Trigger=100380

Analysis Summary

Notes:

Usage coorconv (RA) (Dec)
 
  Angular difference between Flight and Ground position is Usage: arcmin
 
  Partial Coding Fraction:     [ including projection effects ]

  Duration
     T90: 10 +/- 1
        Measured from: 0
                   to: 10     [s; relative to TRIGTIME]
     T50: 4 +/- 1
        Measured from: 2
                   to: 6     [s; relative to TRIGTIME]



  Fluence
     Peak Flux  (peak 1 second)
        Measured from: 2     
                   to: 3     [s; relative to TRIGTIME]
     Total Fluence        
        Measured from: 0     
                   to: 12     [s; relative to TRIGTIME]
     
             Band 1     Band 2     Band 3     Band 4
              15-25      25-50     50-100    100-350     keV
 Total     0.658933   0.756697   0.435739   0.027571
           0.027958   0.028864   0.024359   0.018938 [error]
 Peak      0.073835   0.097362   0.070624   0.006470
           0.008411   0.008963   0.007701   0.005495 [error]

     [ fluence units of on-axis counts / fully illuminated detector ] 

======================================================================
 
=== Fluence/Peak Flux Summary ===
 
              Model    Band1    Band2    Band3    Band4    Band5    Total      
                       15-25    25-50   50-100  100-350   15-150   15-350   keV
Fluence   Power-law 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
Peak flux Power-law 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
 
Fluence   Cutoff-PL 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
Peak flux Cutoff-PL 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
 
Fluence        Band 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   erg/cm2
Peak flux      Band 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
              Error 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.00e+00   ph/cm2/s
 
=== Time-averaged spectral analysis ===
 
Model Ph_index Ph_90err Epeak  Epeak_90err Norm     Nomr_90err chi2   dof
PL    0.000    0.000    -      -           0.00e+00 0.00e+00    0.000  0
CPL   0.000    0.000       0.0    0.0      0.00e+00 0.00e+00    0.000  0
 
 
=== 1-s peak spectral analysis ===
 
Model Ph_index Ph_90err Epeak  Epeak_90err Norm     Nomr_90err chi2   dof
PL    0.000    0.000    -      -           0.00e+00 0.00e+00    0.000  0
CPL   0.000    0.000       0.0    0.0      0.00e+00 0.00e+00    0.000  0
 
Model      : spectral model: simple power-law (PL) and cutoff power-law (CPL)
Ph_index   : photon index: E^-{Ph_index} (minus sign is not included in the index)
Ph_90err   : 90% error of the photon index
Epeak      : Epeak in keV
Epeak_90err: 90% error of Epeak
Norm       : normalization at 50 keV in PL model and at 1 keV in CPL model
Nomr_90err : 90% error of the normalization
chi2       : Chi-Squared
dof        : degree of freedom
 
=== T90/T50 calculation in the 50-300 keV band (BATSE band) using 64 ms lc ===
 
T90 in the 50-300 keV band: 5.568000 sec.
T50 in the 50-300 keV band: 3.968000 sec.
 
=== Table of the duration information ==
 
        Value   tstart    tstop
T100   12.000    0.000   12.000
T90    10.000    0.000   10.000
T50     4.000    2.000    6.000
Peak    1.000    2.000    3.000

Image

Pre-slew 15-350 keV image (Event data; bkg subtracted)

 
Foreground time interval of the image:
Background time interval of the image:

Lightcurves

Notes:

1 s binning

From T0-310 s to T0+310 s
From T100_start - 20 s to T100_end + 30 s
Full time interval

64 ms binning

Full time interval
From T100_start to T100_end
From T0-5 sec to T0+5 sec

16 ms binning

From T100_start-5 s to T100_start+5 s

8 ms binning

From T100_start-3 s to T100_start+3 s

2 ms binning

From T100_start-1 s to T100_start+1 s

SN=5 or 10 sec. binning (whichever binning is satisfied first)

SN=5 or 10 sec. binning (T < 200 sec)

Spectra

Notes:

Time averaged spectrum fit using the pre-slew DRM

Power-law model
Time interval is from    0.000 sec. to   12.000 sec.
Usage: bat_spec_fit_sys.sh (pha file) (response file)           
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            
Cutoff power-law model
Time interval is from    0.000 sec. to   12.000 sec.
Usage: bat_spec_fit_cutoff.sh (pha file) (response file)            
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            
Band function
Time interval is from    0.000 sec. to   12.000 sec.
Usage: bat_spec_fit_band_sys.sh (pha file) (response file)      
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            

Peak spectrum fit using the pre-slew DRM

Power-law model
Time interval is from    2.000 sec. to    3.000 sec.
Usage: bat_spec_fit_sys.sh (pha file) (response file)           
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            
Cutoff power-law model
Time interval is from    2.000 sec. to    3.000 sec.
Usage: bat_spec_fit_cutoff.sh (pha file) (response file)            
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            
Band function
Time interval is from    2.000 sec. to    3.000 sec.
Usage: bat_spec_fit_band_sys.sh (pha file) (response file)      
       This script tries to add the systematic column to the PHA
       file before doing the fitting                            
Plot creation:
Fri Jan  4 18:30:49 EST 2008